Product Description
Automatic charger for lead-acid batteries from 10 to 60Ah
Input voltage: 230V
Output: 74W
Operating temperature: -25 to +40°C
Timer: 2h +/- 30 min (yellow LED)
Terminals: Crocodile clips
Current limiter
Charging current not affected by the variations of DC voltage
Three stage charge control with timer
LED charge indication in three stages:
- orange warning light: constant boost current (5A)
- yellow warning light: charge with voltage (14.7V)
- green warning light: floating voltage (13.7V)
Protection against polarity inversions and short circuits
AC link with European plug
Connection cables with pressure terminals (6.3mm) and battery terminal clips
Standards: EN60335-2-29. EN 60601-1 EMC medical : EN60601-12
In compliance with current EU directives.
Applications: batteries from 15 to 60Ah
This charger has been manufactured with high quality components which comply with the EC, WEEE, and RoHS norms.
As for all chargers a margin of 0.1V in the voltage is acceptable for your equipment and enables it to obtain an optimized charge.
It is recommended to select a charger with the same power capacity (Watt) as the original one. However, in order to reduce the charging time, it is possible to use a charger with a more significant amperage (as long as you stay within a quarter of the battery's capacity e.g. if your battery is 40Ah, your charger must be a maximum of 10A).
Input voltage: 230V
Output: 74W
Operating temperature: -25 to +40°C
Timer: 2h +/- 30 min (yellow LED)
Terminals: Crocodile clips
Current limiter
Charging current not affected by the variations of DC voltage
Three stage charge control with timer
LED charge indication in three stages:
- orange warning light: constant boost current (5A)
- yellow warning light: charge with voltage (14.7V)
- green warning light: floating voltage (13.7V)
Protection against polarity inversions and short circuits
AC link with European plug
Connection cables with pressure terminals (6.3mm) and battery terminal clips
Standards: EN60335-2-29. EN 60601-1 EMC medical : EN60601-12
In compliance with current EU directives.
Applications: batteries from 15 to 60Ah
This charger has been manufactured with high quality components which comply with the EC, WEEE, and RoHS norms.
As for all chargers a margin of 0.1V in the voltage is acceptable for your equipment and enables it to obtain an optimized charge.
It is recommended to select a charger with the same power capacity (Watt) as the original one. However, in order to reduce the charging time, it is possible to use a charger with a more significant amperage (as long as you stay within a quarter of the battery's capacity e.g. if your battery is 40Ah, your charger must be a maximum of 10A).
Additional Information
| Quantity | Unit |
|---|---|
| Dimensions | 171mm (L) x 158mm (W) x 54mm (H) |
| Bulk | 1458,972cm³ |
| Weight | 1,27 KG |
| Brand | Mascot |
| Technical Specifications 1 |  Download technical specifications (PDF) |
My Basket
Your basket is empty
My guarantees
