Product Description
Charger for 12V lead-acid batteries from 1.2Ah to 120Ah
IP65 watertight to splash and dust
Charger supplied with crocodile clips and Tamiya connector
This charger has been manufactured with high quality components which comply with the EC, WEEE, and RoHS norms.
As for all chargers a margin of 0.1V in the voltage is acceptable for your equipment and enables it to obtain an optimized charge.
It is recommended to select a charger with the same power capacity (Watt) as the original one. However, in order to reduce the charging time, it is possible to use a charger with a more significant amperage (as long as you stay within a quarter of the battery's capacity e.g. if your battery is 40Ah, your charger must be a maximum of 10A).
IP65 watertight to splash and dust
Charger supplied with crocodile clips and Tamiya connector
This charger has been manufactured with high quality components which comply with the EC, WEEE, and RoHS norms.
As for all chargers a margin of 0.1V in the voltage is acceptable for your equipment and enables it to obtain an optimized charge.
It is recommended to select a charger with the same power capacity (Watt) as the original one. However, in order to reduce the charging time, it is possible to use a charger with a more significant amperage (as long as you stay within a quarter of the battery's capacity e.g. if your battery is 40Ah, your charger must be a maximum of 10A).
Additional Information
| Quantity | Unit |
|---|---|
| EAN Code | 7350009560450 |
| Dimensions | 165mm (L) x 61mm (W) x 38mm (H) |
| Weight | 500 Gram (s) |
| Brand | CTEK |
My Basket
Your basket is empty
My guarantees
